Darkglass DG210A Microtubes 500-watt 2x10 Bass Combo Amp

This new Darkglass will ship insured from our Rapid City, SD location.

Buy risk free with our 14 day - full refund, less shipping, return policy.  Check out our shop policies for more details.

Designed for ultimate sonic quality and portability, the M Combo Series defines excellence in Analog bass tones and precision. Featuring custom-made Eminence® speakers and powered by an efficient 500 W class D power module, the M Combo Series are perfect for the musician demanding premium analog character across venues, rehearsals, and home setups.

Top Panel Features

• Input: Use this jack to connect your instrument via a standard ¼” mono cable.
• Headphone Output: Connect your Headphones and enjoy the analog cabinet emulation.
• Passive/Active: Use this push-button switch to change from passive to active mode. If your bass is active it can have a hotter signal making the amp to distort early (feel free to use if such additional distortion is desired).
• Compression: Controls the amount of dynamic compression. The make up gain is adjusted automatically.
• Drive: Controls the amount of distortion that the Microtubes Engine will deliver. Press to select the drive mode: OFF/Vintage Microtubes /Microtubes B3K.
• Blend: Use this knob to mix between the Clean signal and the Distortion signal.
• Level :Controls Microtubes Engine’s output volume.
• Low: ±12 dB @ Low shelf
• Low Mids: ±12 dB @ 500 Hz/1 kHz Press to select the frequency
• Hi Mids: ±12dB @ 1.5 kHz / 3 kHz Press to select the frequency
• Treble: ±12dB @ High shelf
• Master: Use this knob to control the overall volume of the combo. Press for Mute.

Back Panel Features

• AC Power ON/OFF: Power ON the combo beast.
• AC Socket: Use this connector to feed electric power to the amplifier. 100 – 230 VAC, 50-60Hz. Set the voltage selector switch to the correct position before turning on the amplifier!
• Tweeter: Turn the tweeter ON/OFF.
• Pre/Post: Select between the unprocessed clean DI and the processed signal.
• DI Output: Use this connector to send your signal to the console, mic preamp, interface, etc.
• Ground Lift: Use this control to lift the ground of the XLR output. If you are experiencing ground noise in your DI signal, try changing this control.
• Aux In: Connect this to the headphone output of your laptop, cellphone, MP3 player, etc. The Aux In signal is fed only to the headphone output.
• Return: Use this input to receive the signal from your outboard gear.
• Send: Use this output to send the signal to your outboard gear.
• Footswitch: Use to connect the Darkglass Super Intelligent Footswitch, Intelligent Footswitch or MIDI Footswitch using a 1/4″ mono instrument cable.
• External Speaker: Use this connector to connect the amplifier to an external speaker cabinet. The SpeakON Combo jack allows for SpeakON or ¼” speaker cable operation. The minimum load impedance is 8 Ω. The minimum power rating must be 250 W.
• WARNING: Do not use an instrument cable with this jack. Using an instrument cable can damage your amplifier.

Technicals details

• Woofers: Custom Design Eminence® Speaker
• Horn: Eminence® Tweeter
• Power Rating RMS: 500 Watts
• Dimensions: Width: 46.4 cm / 18.2″, Height: 61.1 cm / 24″, Depth: 39.5 cm / 15.5″, Weight: 17.3 kg / 38.13 lb
• WARNING: This device can emit extremely loud sounds that might result in temporary or permanent hearing loss. Please proceed with caution when setting and adjusting the volume.